The STIHL HLA 85 telescopic hedge cutter is a versatile addition to the STIHL 36V AP Battery Range. The HLA 85 features an adjustable cutter which makes it suitable for a number of tasks on tall or deep hedges. With a total extended length of 3.3m it gives the operator a safer approach to taller hedges. The tool is lightweight and has very low vibrations making it suitable for professionals who would use the machine for extended periods. The brushless EC motor keeps maintenance to a minimum while increasing the tool’s running time.
The handy telescopic shaft can be extended from 260cm to 330cm. Simple shaft length adjustments are made using the quick release mechanism.
Maintenance-free, brushless and efficient STIHL EC motor ensures a longer running time in operation as well as an increased service life of the device. Control of the motor via the new STIHL EC electronics, which loads e.g. Is detected by thick branches and is adjusted accordingly, even before the engine speed breaks. Thus, the number of strokes during the cutting always remains constant. This guarantees maximum cutting performance. (Fig. Similar)
Double sided cutting blades
STIHL hedge trimmers with double-sided cutting blades cut both vertically and horizontally.
Blade tip protector
The tip protector comes as standard and makes cutting near the ground or along walls easier while protecting the special cutters from damage.
Protects the cutting blade for safe storeage and transport of the hedge trimmer.
(AP200) 120min run time | 4.1kg (AP300) 180min run time, Cutting Thickness up to 16mm,
Stroke Rate 3,000 per min, Bar Length 50cm, Tooth Spacing 33mm
Transport Length 180cm
Total Length 260 - 330cm
Head Adjustment 115 °
1) With blade, with handle, without protection, without battery
2) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
3) K-factor according to DIR 2006/42/EC = 2m / s ²
4) Battery life times are approximate and may vary depending on application