EU30I Invertor

.

Descriptions

Introduction

Eu30is

The EU30is features a microcomputer-controlled sine wave inverter that guarantees commercial-quality electricity – making it ideal for use with frequency sensitive electrical equipment such as computers.

It also uses a high-speed multi-point alternator that is integrated into the engine itself. This Honda developed technology reduces the overall weight and size by 25% to 50% compared to similarly classed conventional models, making it very portable.

The EU30is also features an Eco-throttle which adjusts the engine speed to meet the load demand. This increases fuel economy whilst also reducing noise as the engine is not required to run at full capacity unnecessarily.

The generator is Parallel Connection capable. This feature allows two EU30i’s to be quickly and easily linked using a special parallel connection cable to double your output to 6Kva. With electric-starting and enough power to be used in a wide range of home, recreational and professional uses, the EU30is incorporates all of Honda’s portable power technology.

 

Specifications
Category Generators
Sub-Category Commercial
Product Name Commercial – EU30is
Product Code EU30is UAO
Ignition System Transistorized magneto
Oil Alert Yes
Oil Capacity (litres) 0.55
Starting Recoil & electric
Recommended Fuel 4-Stroke ULP
Fuel
0.65*/1.86 (litres/hr)
(* = with Eco-Throttle on)
Fuel Tank Capacity (litres) 13
Noise Level 51*/58 (dB (A) @ 7m)
Dimensions (mm) 655 x 445 x 555 (LxWxH)
Dry weight (kg) 59
Maximum Watts 3,000
Rated Watts 240v/50Hz 2,800
12 Volt DC/Amps 12v @ 12a
Battery Charging Yes
Frequency Meter No
Volt Meter No
Fuel Gauge Yes
AC Circuit Breaker Yes
DC Circuit Breaker Yes
Pilot Lamp Yes
Air Filter Standard cartridge type
Parallel Operation Connection Ports Yes
Parallel Operation Connection Cable Optional
4 Wheel Dolly Kit Optional
Important Inverter Information
  1.  Using your Honda Inverter – Before connecting an appliance to a Honda Inverter, you need to check the Inverter has enough capacity (watts) to both start the appliance and keep it running at maximum level. This includes checking both the maximum and rated output.
  2. Calculating Rated Power – Some appliances light light globes, have a clearly marked wattage. However, most give the required number of watts (the “rated power”) on an attached compliance plate. In cases where the appliance only refers to required amperes (amps or A) simply convert to watts using the formula below.
  3.  Converting Amps to Watts – Multiply the amperage listed on the compliance plate by the voltage of the mains electrical system (240 in Australia). For example a 5 amp appliance requires 1200 watts to run (5 x 240).
  4.  Start-up Power – In addition appliances with electric motors such as drills, sanders, polishers and power saws etc, need an extra “boost” of watts at start-up. This can be substantially higher than the operating figure printed on the compliance plate, and depends on the type of motor. Split phase motors require 8 to 10 times their rated power for startup and capacitor motors need 4.5 times their rated power to start. The more common series motors need 1.5 times their rated power to start up. If you are unsure, check with the appliance manufacturer.
  5.  Parallel Connection – To double your power and duplicate the output of a a single larger generator, Honda’s versatile EU10i, EU20i and EU30i Inverter can be linked quickly and easily using a special connection cable.